IEC 60529 has been developed to rate and grade the resistance of enclosures of electric and electronic devices against the intrusion of dust and liquids. It also rates how easy it is for individuals to access the potentially hazardous parts within the enclosure.
Iec 60529 Standard.pdf
The first edition of IEC 60529 was published in 1976 with the aim of creating a single document to bring together all requirements regarding protection by enclosures. Previously, separate standards had been developed for motors and low-voltage switchgear and controlgear.
The IP code or ingress protection code indicates how well a device is protected against water and dust. It is defined by the International Electrotechnical Commission (IEC) under the international standard IEC 60529 which classifies and provides a guideline to the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact, and water. It is published in the European Union by the European Committee for Electrotechnical Standardization (CENELEC) as EN 60529.
DIN 40050-9 extended the newer IEC 60529 rating system with an IP69K rating for high-pressure, high-temperature wash-down applications.[5] Enclosures conforming with ISO 20653:2013 must not only be dust-tight (IP6X), but also able to withstand high-pressure and steam cleaning.
In the U.S., the National Electrical Manufacturers Association defines NEMA enclosure types in NEMA standard number 250. The following table outlines which IEC 60529 IP code each respective NEMA guideline meets. Ratings between the two standards are not directly equivalent: NEMA ratings also require additional product features and tests (such as functionality under icing conditions, enclosures for hazardous areas, knock-outs for cable connections and others) not addressed by IP ratings.
Adding to the confusion, there appears to be a typo in IEC 60529 standard that has caused some headaches (and probably not only here in our lab!). IEC 60529 was written in French and the standard, when purchased, typically comes in French and English in the same document.
We also offer testing to many commercial and military ingress protection standards. These include MIL-STD 750 Method 1011.1, MIL-STD 883 1002, and RTCA DO-160 Section 10.0 Waterproofness Testing. Some of the more common commercial standards include NEMA 250 testing , IEC 60529 testing, ASTM D951 testing and ISO 20653 testing.
IEC 60529:1989+A1:1999+A2:2013 Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV. The contents of the corrigenda of January 2003, September 2007, October 2009, October 2013, May 2015 and January 2019 have been included in this copy. This consolidated version consists of the second edition (1989), its amendment 1 (1999) and its amendment 2 (2013). Therefore, no need to order amendments in addition to this publication.
ITC had created full facilities to do water and dust testing. All the IP testing is in its scope. All equipment are calibrated and are accurate to determine results. The Talcum powder used in Dust chamber is also as per IEC 60529 to test accurately. 2ff7e9595c
Comments